+86-311-85150599
 E-mail: glame@deadendgrip.com
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

Preformed Guy Grip

The dead ends are made of material compatible with the cable to which they are applied.
The dead ends with helical wires are used to given an even distribution of force ever a wide surface preventing strain concentration and potential damage to conductors.
Its breaking load exceeds that of the conductor to which is applied.

Product Description

Guy wire fittings

preformed ADSS dead end grip for sale suppliers

Adjustable guy wire clamp

Design

This type of dead ends is a fast, simple safe method for retaining or securing cables such as staywires, groundwires etc.

Standard products have an open helix loop but they can be supplied with a cabled loop to prevent slackening of the line after prolonged installation.

The dead ends are made of material compatible with the cable to which they are applied

The dead ends with helical wires are used to given an even distribution of force ever a wide surface preventing strain concentration and potential damage to conductors.

Its breaking load exceeds that of the conductor to which is applied.

Note

The layer direction of distribution-grip dead ends must be the same as that of the outer stranding of the conductor to which it is applied.

Ordering Information

When ordering, please specify:

-conductor type,stranding,breaking strength and lay direction

-groove width and diameter of fitting used.

preformed ADSS dead end grip for sale suppliers

Guy-grip dead ends

preformed ADSS dead end grip for sale suppliers

Selection Chart

Model   Sectional area (mm²) Outside diameter(mm) Clamp length(mm) Clamp weight(kg) Fittings (thimble clevis、adjustable clamp)
NL-25G 25 6.60 640 0.2 0.2
NL-35G 35 7.80 720 0.3 0.3
NL-50G 50 9.00 910 0.5 0.5
NL-70G 70 11.00 1020 0.8 0.8
NL-95G 95 12.50 1340 1.7 1.7
NL-100G 100 13.00 1340 1.7 1.7
NL-120G 120 14.00 1460 2.2 2.2
Note: The meaning of the letters and numbers in the model no.: N-strain clamp;L-spiral preformed;after“-”is the suitable steel strand type;The guy wire is the galvanized steel cables (YB/T5004-1993).we are preformed ADSS dead end grip for sale suppliers and we are provide downlead clamp for ADSS,preformed ties for cables,you can know it.

HOT PRODUCT

Component: Single layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc. Characteristic: Simple structures, easy installation, and to lower the costs of the project.
1. Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protection fittings (material:the aluminum clad steel wire or galvanized steel wire) 2. Forming speed: 0-1.5m/s , Diameter: 1.67-5.2mm(the aluminum clad steel wire or galvanized steel wire), 1.78-9.27mm(aluminum alloy wire)
Component: Housing set, Rubber insert, Amor rods Conditions For The Usage: Suspension the cable or ground wire to the pole/tower.
The cable margin supporter is used for extra cables when emplacing cable connective ends, Usually, one cable margin supporter is supplied to each splicing closure.
Function: It fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition. Conditions Of Usage: Initial or end poles/towers of cable lines, or connecting poles/towers, etc.
Function: Plastic ties are designed for securing conductors in the groove of insulators,they are intended for application with covered conductors / jacked conductors.

Home

CONTACT US
 E-mail: glame@deadendgrip.com

 Tel: +86-311-85150599

 Add: Room 11-2-201 Haideyuan No.5 Yuxiang street Yuhua district, Shijiazhuang, Hebei, China.

Get in Touch
Hebei Glame Import and Export Trade Co.,Ltd.