+86-311-85150599
 E-mail: glame@deadendgrip.com
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
Home » Products » Joint Box » Joint Box for ADSS

Joint Box for ADSS

Stacking semi-diameter: ≥40mm
Length of stacking rest: ≥1.6m
Degree of seal: 1 05Kpa
Temperature scale: -40 60
Anti-tension: 2000N
Anti side-pressure: 2500m/10cm
Anti-wallop: 1 8N·m

Product Description

n1

Conditions For The Usage

Excess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter less than 18.5mm in overhead lines.

Structure Characteristic

1. Excess length of fiber is protected in stacking tray, each one is a space for 12 cores fiber. Hot-melting & hot-shrinking with a covering-pipe toprotect is the connecting form.

2. Stacking tray is designed as unattached tray for free operating without affecting each other.

3. The adoption of sealed gaskets and cone-shaped sealed gasket is suitable to cater different cables diameter, four cables should be installed in a splice closure if you need. It's convinent to be repaired as a result of the structure which is easy to open and close.

4. The metal parts of the cables should be lead out during the installation. We've prepared special fixed brackets which is safe and easy to install.

Capacity Parameter

Stacking semi-diameter: ≥40mm

Length of stacking rest: ≥1.6m

Degree of seal: 1 05Kpa

Temperature scale: -40 60

Anti-tension: 2000N

Anti side-pressure: 2500m/10cm

Anti-wallop: 1 8N·m

Size

Outline: cylinder (stand)styles.

HOT PRODUCT

Component: Single layer glue thread, thimble, extension loop, U-shaped hanging loop, bolt, nut etc. Characteristic: Simple structures, easy installation, and to lower the costs of the project.
1. Suitable for processing the preformed strain clamp ,preformed suspension clamp and the preformed protection fittings (material:the aluminum clad steel wire or galvanized steel wire) 2. Forming speed: 0-1.5m/s , Diameter: 1.67-5.2mm(the aluminum clad steel wire or galvanized steel wire), 1.78-9.27mm(aluminum alloy wire)
Component: Housing set, Rubber insert, Amor rods Conditions For The Usage: Suspension the cable or ground wire to the pole/tower.
The cable margin supporter is used for extra cables when emplacing cable connective ends, Usually, one cable margin supporter is supplied to each splicing closure.
Function: It fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition. Conditions Of Usage: Initial or end poles/towers of cable lines, or connecting poles/towers, etc.
Function: Plastic ties are designed for securing conductors in the groove of insulators,they are intended for application with covered conductors / jacked conductors.

Home

CONTACT US
 E-mail: glame@deadendgrip.com

 Tel: +86-311-85150599

 Add: Room 11-2-201 Haideyuan No.5 Yuxiang street Yuhua district, Shijiazhuang, Hebei, China.

Get in Touch
Hebei Glame Import and Export Trade Co.,Ltd.